MSRM US300 Extender Setup

The MSRM US300 Extender Setup gives you the best speed and coverage in your home. It is compact in size, making it easy to include into your home’s decor. With a maximum Internet bandwidth of 300Mbps, it supports the 802.11b/g/n Wi-Fi communication protocol. You can connect it to your display, desktop, mobile phone, game console, tablet, and other devices. Learn how to set up MSRM Extender.

MSRM Extender Setup via Browser:

Connect your extender midway between your router and the place where you’ll require internet access.

1. Now take your phone or laptop and look for the MSRM network name in your Wi-Fi list. Wireless-N Wireless-AC is a possibility.
2. Connect to the network; this may take up to 10 seconds, and the MSRM may then display you and no internet.
3. On the same computer, open a new tab and type AP in the address bar.
4. Complete the MSRM US300 extender setup by using OR 192.168.10.1.
5. It will direct you to the admin login page, where you may enter your username and password.
6. Select the repeater option from the list of options and go to the next step.
7. After searching the network, select the key W-Fi network name from the list of Wi-Fi networks that appears.
8. Now input your Wi-Fi password, which should be the same as your router’s password.
9. You can either alter or leave the MSRM network name as is in the next stage.
10. After initialization, your extender network will appear as your Wi-Fi Network SSID Ext.
11. Until the extender reboots, you should try joining the PCs to the enlarged network.

MSRM US300 Extender Setup via via WPS method

• Before the setup is complete, you must connect in your New Extender Setup in the same room as your router.
• When you push the WPS button on the US300 repeater after the power light has been steady, you will notice a flashing light on it.
• Within two minutes, press the WPS button on your router. If your router’s WPS button is disabled, go to the router’s wireless settings and enable WPS from there.
• On both cameras, the WPS indicator is now flashing for about 10–15 seconds.
• After a successful configuration, the WPS on the router will stop working and the WPS on the repeater will solidify.
• In your Wi-Fi folder, an extender now appears as your network name (SSID EXT).
• Remove the extender from the wall and place it halfway between your router and the location where you require internet access. Keep it away from large equipment like the air conditioner and microwave.