Re.rockspace.local Extender setup

Re.rockspace.local Extender setup

After properly connecting your wifi go extender, you can successfully complete the arrangement from the site re.rockspace.local on your wifi enabled computer. If the Rockspace extender is set up, you can switch it to another position where wifi signals are appropriate, and the extender will disperse the device uniformly across the building.

The re.rockspace.local setup arrangement projects can be seen underneath –

• Connect the extender to a power outlet.
• re.rockspace.local is a localised version of re.rockspace.com
• Establish a secure connection between the extender and the PC.
• It is necessary to switch on the power LED lamp.
• Open a web browser and go to the re.sockspace.lcoal website gui.
• When the site loads, fill in the fields with the extender’s default certifications.
• After pressing login, the re.rockspace page will appear.
• Follow the prompts and instructions provided there to easily set up the wifi range extender.

Rockspace Extender Setup via manual method

If you want to set up your wifi extender manually, you can do so right away by following the steps below –

1. Link to the rockspace extender setup site by plugging in the wifi run extender and turning it on.
2. Link the rockspace wifi range extender to your computer.
3. Open a web browser and type re.rockspace.local into the address bar. You’ve arrived at the login page.
4. When you get to the login tab, type in your username and secret key.
5. You can now login after entering the default certifications.
6. Then you’ll see the new extender setup tab, where you can see the extender’s successful configuration.
7. Save all of your settings before moving the extender to a location where the wifi signals are appropriate.

After enrolling your computer and positioning the extender in the proper position, finish the wifi extender setup. The LED markers on the wifi go extender will illuminate as shown by the design of the wifi signals received at a particular location, indicating the correct location.

When the WPS button on the switch is missing, you can easily configure the extender using the manual technique mentioned above.If the web interface fails to attach you to the rockspace extender setup site, try the extender’s IP address, which is 192.168.0.254.

Rockspace Extender Setup via WPS

If your current wireless network supports WPS, use the instructions below to set up your extender with the WPS button.

• For 5 seconds, press and hold the WPS button on the Extender. On the front, the WPS LED image should blink.
• Click the WPS button on your wireless router, gateway, or access point within 2 minutes. Wait for the extender to link to your current wireless network for at least 2 minutes.
• The WPS LED on your Extender will turn solid green and the 2.4 GHz Link Rate LED will light up if the connection is successful.
• Note: If the 2.4 GHz Connection Rate LED does not illuminate, repeat steps 1–2 or check to see if your router supports WPS.
• Simply repeat steps 1 and 2 to link the Extender to the 5 GHz band if your router supports it. The 5 GHz Connection Rate LED on your Extender should light up if all went well.
• If the extender configuration is complete, the extended network for each related band is broadcast as “network name 2GEXT” and “network name 5GEXT.”The password for connecting to the extender’s network is the same as for connecting to the router’s network.

Dual Band Rockspace AC1200 Wi-Fi Repeater:

Nothing makes the Dead Zones more annoying than a poor Wi-Fi signal in your own house.

Positioning Re.Rockspace Local extenders in the areas where the signal becomes weakest is a quick and easy way to remove dead zones in your own home or in a large coverage area.

Essentially, Rockspace wireless range extenders enable users to boost Wi-Fi signal strength by connecting any wired device to it, resulting in increased performance and efficiency within the same bandwidth range. Our organization’s goal and top priority is customer loyalty.

Even if you are not provided with technical support, we and our team are full of experts and available 24/7 to assist you with any problems relevant to your order.

Please do not hesitate to email us, or call us on our toll-free number. While the standard of our product is present, we would be happy to assist you at any time if you have any questions.

Universally compatible:

In fact, Wi-Fi extenders or repeaters work with any form of wireless router or access point. As a result, they will boost the Wi-Fi of any standard router or any type of access point. Furthermore, because of its universal compatibility, it is a technology that can expand and reinforce a wireless network in any bandwidth spectrum, even if it evolves over time.

Because of its compact size and easy installation, it is also reliable and compatible in small spaces.

Setup is simple:

The wireless range extender can be quickly set up using the WPS button on the Re.rockspace local Wi-Fi range extender.

The user just needs to press the button and follow the instructions to attach the wireless range extender to the wireless router.

The repeater, access point, and router modes are the most popular modes of operation for this extender.