Wavlink AC1200 Setup

Gradually improve your wireless network with the help of wireless wireless range expansion Wavlink AC1200 Setup With a very compact and comfortable design, you can take advantage of hassle-free positioning. In addition, its sleek form makes it easy to mix up with the existing décor of your house or office.

You can effortlessly increase the range of your existing wireless network anywhere with the Wavlink ac1200 wireless range expansion. Four antennas are designed to make your existing network better and more dependable in a single, proprietary omnidirectional design.”

The high performance antennae enable all devices from every corner of your house to be connected. In addition, this extension connects your router wirelessly. Thereby, it identifies and boosts your router’s signals automatically.

Wavlink AC1200 Dual-band Extender Setup

Follow the following step by step information for WPS method installation of the Wavlink AC1200:

1. Connect to the power of the Wavlink AC1200.
2. Wait for the solid blue light that shows the extension is powerful.
3. Press the WPS button on the extender.
4. And press the wireless router or modem to press the WPS button.
5. Do not disconnect the AC1200 when the light flashes on the extension.
6. With the WPS approach, the AC1200 configuration of Wavlink is complete.
7. You’ll notice the power, customer, device and WPS on the WIFI repeater all turn bright green.
8. Place the Wavlink extender where weak signals are received. And get decent connectivity to wireless internet.

How to install Wavlink AC1200 WIFI Range Extender?

Follow the following steps to connect the AC1200 extension Wavlink through the Web browser:

• Plug into the power socket your AC1200 Range Extender.
• Now your extender must be switched to repeater mode.
• Take a computer or tablet and choose the options for WIFI settings.
• Search for and connect to the Wavlink-N network.
• Open any web browsers, including Google Chrome, Mozilla Firefox, Microsoft Edge etc, when connected to the explorers network
• Type wireless.wavlink.com or the address bar of 192.168.10.1.
• The Wavlink AC1200 setup page is now available.
• Follow the on-screen instructions for the home network installation of your device.

How to reset Wavlink WIFI Extender from AC1200?

1. In the first step, the extensor is connected to an electric connector to reset the Wavlink AC1200.
2. Once the power led light on the extender is available.
3. Find a clip of paper or teeth selection.
4. And hold down the 10–15 second reset button and release the pin hole.
5. The lights on the leading power turn to an amber tint and now wait until the leading light becomes solid green.
6. The extender has now been reset successfully to the default factory.
7. To reinstall the WIFI extender, follow the Wavlink AC12oo setup process.