Ap.setup is used to install MSRM US302 Extender

Andrew Wilson
3 min readOct 27, 2021

The MSRM US302 Extender Setup increases the range of your existing WiFi network and provides speeds of up to 750Mbps. Internal antennae and larger amplifiers allow you to extend the network’s coverage throughout your home. Thanks to FastLane technology, the MSRM US302 Extender improves WiFi performance across both frequency bands. It works with any standard router and is great for streaming and gaming in high-definition.

Before you begin configuring your WiFi repeater, you should download the WiFi Analytics application. You may use the app to check the signal strength across the house. As a result, you may come across areas with limited WiFi access. After you’ve finished the MSRM US302 Extender Setup, open the app and test the wifi signal to see how much your WiFi coverage has improved since you started.

With that stated, without further ado, please see the instructions for customising the MSRM US302 below. So, how about we get this party started?

How to Install and Configure MSRM US302 Extender

To install and configure an MSRM Extender Setup, go to the default MSRM US302 Extender online URL Ap.setup, which is available via a web browser. Let’s take a short look at the MSRM US302 installation process, which is outlined below:

Extend the life of your Extender by removing it from the packaging.

To begin, make sure your MSRM US302 Extender has been correctly unboxed. The LED lights are located on the front panel of your extender, while the device’s buttons are located on the side panel. The MSRM US302 Extender serves as a connection point between your current router and a WiFi device that is outside of the range of your current router’s WiFi signal.

Connect the MSRM US302 to your computer and press the “Apply” Power button.

the MSRM US302 Extender in a prominent area in your home at this time. Avoid placing this item near concrete walls, microwaves, electric water tanks, treadmills, vacuum cleaners, mirrors, glassware, corners, air conditioning, and refrigerators. Once the extender has been properly installed, connect it to an electrical outlet and turn it on. Always use a range extender with a working wall socket and a consistent power source.

Connect your computer to a wireless network (Wi-Fi).

In the next step, you’ll connect your repeater and a wireless connection. Select a WiFi network and press the connect button to connect to it. You will be required for a password before being allowed to connect your repeater to your network if it is password-protected.

having access to MSRM US302 Installation Assistant Turn on your PC or laptop to ensure it is connected to a wireless network. To begin, go to the repeater login page in your preferred web browser. To log in, you must first enter your login credentials. The MSRM US302 installation assistant appears on your desktop when you’ve successfully joined in.



Andrew Wilson

We provide support for ap.setup or any other issue related to your extender in USA, UK, AUSTRALIA, CANADA. Call now +1–855–771–3009